top of page
AAI UNEVEN BARS, RAILS & MATS
ELITE™ Uneven Bars

Made with highly engineered materials to ensure longevity and withstand many years of competition and training.

  • FIG Approved

  • Meets USAG, NCAA® and NFHS competition specifications

  • AAI features unique rod ends which allow for more flex and reduces the lengthy "break-in" period associated with other manufacturers' systems

  • Bar width adjusts from 95cm to 192cm

  • Low bar adjusts in height from 61” (155cm) to 72 7/8" (185cm)

  • High bar adjust in height from 92 ½” (235cm) to 102 5/8” (265cm)

  • Dual snap and spin lock systems provide optimum height accuracy and security

  • Graphite X & E rails

  • Assist Step Optional

  • Footprint measured from anchor points is 18' x 13' (5.5m x 4.9m)

  • Can be used with the Freestanding Uneven Bar Adapter and/or SRS System

  • Includes four cable covers

  • Uprights are chrome-plated, while the bases are finished in powder-coated navy blue metallic

  • Unit requires four floor anchors (not included)

Item   
SKU  
ELITE™ Uneven Bars with Graphite X Rails
ELITE™ Uneven Bars with Graphite E Rails
​Uneven Bars Protective Pads (not included)
407-080
407-109
​416-369
International Asymmetric Bars

Designed to easily show height markings for FIG compliant requirements during competition.

  • FIG Approved (407-126)

  • Meets USAG, NCAA® and NFHS competition specifications

  • Designed primarily for use in Elite level gymnastics programs

  • Uprights and bases are chrome-plated

  • Slide collar allows unit to exceed FIG bar-to-bar width specifications, adjusting from 90cm to 200cm

  • Height markings on the piston makes adjustments of the system more convenient and accurate

  • Fixed spreader bar helps ensure both bar heights are set correctly, saving time during set up 

  • Low bar adjusts in height from 61" (155cm) to 72 7/8" (185cm)

  • High bar adjust in height from 92 ½” (235cm) to 104 ¼” (265cm)

  • Footprint measured from anchor points is 18' x 13' (5.5m x 4.9m)

  • Graphite X & E bars

  • Can be used with the Freestanding Uneven Bar Adapter and/or SRS System

  • Unit requires four floor anchors (not included)

Item   
SKU  
International Asymmetric Bars with Graphite X Rails (FIG approved)
International Asymmetric Bars with Graphite E Rails
407-126
​407-326
Constant Tension Bars

The Constant Tension Bars (CTB) are designed to use for training as well as making it possible to keep tension while making width adjustments.

  • Meets all FIG and NCAA® specifications

  • Footprint is reduced to only 12' x 7' (3.7m x 2.1m)  from 18' x 13' (5.5m x 4.9m), which is 64% reduction in floor space

  • Release one loadbinder and easily remove the low rail. The upper rail still remains stable and usable as a single bar, high bar, or strap bar

  • The high bar adjusts from 92 ½" (235cm) to 102 5/8" (265cm)  

  • The low bar adjusts from 61" (155cm) to 72 7/8" (185cm)

  • Bar width adjusts from 95cm to 192 cm

  • Graphite X & E rails

  • Uprights are chrome-plated, while the bases are finished in powder-coated navy blue metallic

  • Includes floor anchors & tie down system

Item   
SKU  
Constant Tension Bar with Graphite X Rail
Constant Tension Bar with Graphite E Rail 
​Constant Tension Bar Conversion Kit (includes new cables, tie downs, anchors, and four shorter spin locks to replace the spin locks used for height adjustment 
407-053
407-073
​407-057
Graphite X Rail

High-tech manufacturing process utilizes a graphite and fiberglass composite.

  • FIG Approved

  • Meets FIG, USAG, NCAA® and NFHS competition specifications

  • Constructed of a hollow fiberglass core with a wood veneer securely laminated around the outside

  • Bar is round with an outside diameter of 1.575” (40 mm)

  • Pivot points of the bar are 94-1/2” (240cm) center-to-center

​

​

​

​

​

​

​

Item   
SKU  
Graphite X Bar with collars -Each
​Graphite X Bar with collars and pistons -Each
407-152
​407-154
Graphite E Rail

Flexible rail that provides the feel of wood with the strength and resiliency of fiberglass

  • FIG approved

  • Meets FIG, USAG, NCAA® and NFHS competition specifications

  • Constructed of a hollow fiberglass core with a wood veneer securely laminated around the outside

  • Made with less graphite strands, making it 15-17% less rigid than the Graphite X Rail

  • Bar is round with an outside diameter of 1.575” (40 mm)

  • Pivot points of the bar are 94-1/2” (240cm) center-to-center

​

​

​

​

Item   
SKU  
Graphite E Bar with collars -Each 
​Graphite E Bar with collars and pistons -Each  
407-352
​407-354
FIG Competition Uneven Bars Landing Mat Configuration

FIG Competition Uneven Bars Landing Mat Configuration:

  • (2) N 416-308 (5’ x 8’ x 20cm) V2 Slab (152.40cm x 243.84cm x 20cm)

  • (2) L 416-307 (8’ x 15’ 6” x 20cm) V-Spec (243.84cm x 472.44cm x 20cm)

  • (1) H 416-312 (5’ x 7’ 6” x 20cm) V2 (152.40cm x 228.60cm x 20cm)

  • (1) O 416-263 (8’ x 15’ x 10cm) Supplemental (243.84cm x 472.44cm x 10cm)

​

​

​

​

​

​

​

​

​

Item   
SKU  
FIG Uneven Bars Competition Landing Mat Set
416-306
bottom of page